Portable ultrasound with TENS for physiotherapy UltraRelief 2.0
Portable device that uses combined therapy that can be applied at the same time or separately: TENS and ultrasound. Ideal for home and outpatient treatments.
This new portable ultrasound and TENS equipment stands out for its more ergonomic design, for its ease of use and above all for being a 3-in-1 device: only ultrasound, only electrotherapy or all of both at the same time.
Indicated for the treatment of post-traumatic pain, chronic pain, postsurgical pain, joint contractures and muscle spasms.
Technical characteristics:
- Professional device for combined treatment ultrasonotherapy + electrotherapy, ultrasonotherapy or electrotherapy.
- 93/42 / CEE certification.
- Ultrasound beam designed for optimal tissue penetration.
- It has 5 levels of intensity of the ultrasonic beam: 5%, 20%, 50%, 80% and 100%.
Device operation:
It has two main programs: ultrasound and combination therapy. For each program, the user must first apply ultrasound transmission gel (*) to the area to be treated.
Combination therapy requires the application of electrodes. Before starting treatment, the following settings can be adjusted for each program:
- Ultrasound intensity (low, medium or high).
- Treatment time (5, 10 or 15 minutes).
- Stimulation intensity (ONLY in combination therapy).
Once you have configured and selected settings, the treatment head will make a slow circular motion over the treatment area. At the end of the session, the device will turn off automatically.
(*) Gel not included
Technical data:
Ultrasound:
- Frequency: 1MHz ± 10%
- Ultrasound power (MODE): 3 intensity levels (L, M, H)
- Output power: 0.3W (L), 4W (M), 5W (H)
- Pulse repetition rate: 100Hz ± 10%
- Pulse width: 10 ms
- Pulse duration: 3ms-5ms
- Rtpa: 2-3.3
- Duration factor: 30%, 40%, 50%
- Effective radiation area (AER): 4.0cm²
- Intensity: 1.25w / cm² (50% duty cycle)
- RBN (Max): 5.0
- Beam type: collimated
- Waveform: Pulsed
- Treatment time: 5 min, 10 min, 15 min
- Treatment head material: Aluminum
TENS:
- Treatment time: 5 min, 10 min, 15 min
- Carrier Frequency (CF): 2.5 kHz
- Pulse frequency: 1-120 Hz
- Output voltage: O ~ 15V (500 load)
- Stim power control: 25 intensity levels
Accessories included:
- Electrode 50 x 100 mm.
- Electrode cable.
- AC adapter 100-240V 50-60 Hz, 1.2A