Black Dragon Autoclave 8 Litres Class B for Tattoo Studios

Autoclave Black Dragon 8 litres class B for tattoo studios.

Programmes:

Safety:

• A cycle will not start unless the door is firmly closed.
• An automated system with double hydraulic locking device prevents the door from opening while chamber is pressurized.
• The safety valves prevent overpressure in the generator and in the chamber.
• A safety thermostat prevents overheating in the chamber and in the generator.
• An automatic safety lock prevents accidental opening of the door during the sterilisation. A power protector automatically cuts off power in case of short circuit or if power supply is not very stable.
• The failure alarm indicates a cycle failure and provides an error code.
• The door alarm indicates that the door is not properly closed.
• The low water alarm indicates when the water tank is empty or too full.

 Technical features:

• Power supply: 220-240V; 50/60 Hz; 10A
• Chamber: 170 x 320 mm
• Breaker: F16A / 400V
• Nominal power: 1500VA
• 1500 VA
• Sterilisation temperature: 121 ºC / 134 ºC
• Capacity of the distilled water tank: 2.5 L
• Working temperature: 5 ºC / 40 ºC
• Working relative humidity: Max. 80%, non condensing
• Overall dimensions: 414 x 365 x 530 mm
• Net weight: 34.5 Kg
• Max. noise level: <70 dB
• Atmospheric pressure: 76 / 106 kPa

Components:

• Distilled water tank
• LCD display
• Control panel
• Main power switch
• Drain connector (distilled and used water tank)
• USB port
• Safety valve
• Ventilation grid
• Circuit breaker
• Power cable
• Rating plate

Accessories included:

• Steriliser
• USB
• 2 instrument trays
• Tray rack
• Tray holder
• Door adjustment tool
• 2 draining hoses
• Door gasket
• User manual

Standards:

• 93/42/EEC Directive on Medical Devices.
• 97/23/EEC Directive on Pressure Equipment.
• EN 13060 Small Steam Sterilisers.
• EN 61326, EN 61000 Electromagnetic Compatibility.
• EN 61010-1, UL 61010-1 Safety requirements.
• EN 61010-2-040, IEC 61010-2-040 Specific requirements for steam sterilisers used for treatment of medical materials.

In the UK this product needs to be inspected and certified anually. Quirumed don´t offer this service and you will need to find your own local techncian who can do this. We do however have a technical service based in Spain to cover the product during the warranty period

AUTOCLAVE - step by step:

1- Open the door, take the tools and accessories that are within the sterilisation chamber, remove the wrapper and clean them.

2- Connect the power cord to a suitable power source.

3- Connect the printer (optional. It is sold separately, ref. 922-PRINTER04).

4- Swith on: The main switch is located on the right bottom area in the front panel.

• Once activated, the LCD screen is on, where basic operation icons such as the position of the door, the water level, the sterilisation programme, date, time, etc. appear.

5- Fill tank with distilled water.

• Remove the top lid and fill, if you hear a signal, it means that you exceeded the permitted level of water in the tank, please stop immediately and drain the amount of water necessary for the signal off.

6- Preparation of instruments:

• Place instruments made of different materials in different trays, however take care to separate them before sterilisation.
• If the instruments are not stainless steel, put some sterilisation paper between the tray and the instruments.
• Do not allow direct contact between instruments of different materials.
• Verify that all instruments are in correct position.
• Place instruments such as lenses, containers, tubes, etc. inverted, so that water does not stagnate within them.
• Do not overload the trays beyond their limit.
• Do not overlap the trays on top of each other, or put them in direct contact with the wall of the sterilisation chamber.
• Do not use metal clips or pins, this may impair the operation of the steriliser.
• Wrap the instruments one by one. If you need to wrap several instruments together, make sure that they are made of the same material.
• Seal the pouch with special adhesive tape for sterilisation or use a heat sealer.
• Make sure that the pouch is properly positioned within the chamber on the trays (resting on the plastic part).

7- Choose the sterilisation programme.

8- Start the sterilisation cycle.

• After selecting the sterilisation programme, insert instruments into the chamber on the trays, using the supplied plastic handle.
• Once the instruments are placed within the chamber, close the door by turning the knob.
• Caution: make sure to close the door, otherwise the steriliser displays an alarm and can not start or the programme stops during the cycle.

9- Start the sterilisation programme.

• Press the start button, then the steriliser starts operating during approximately 30-75 minutes.

10- Sterilisation cycle finished.

• After finishing the sterilisation cycle, the printer (not included*) will print the full report automatically and the data will be saved in the USB memory (.txt format).
• After the pressure drops to zero, you can open the door and remove the instruments. The steriliser alerts by a beep once the sterilisation cycle is completed.
• Caution: Use the supplied plastic handle for supporting trays when you take out the instruments.

IMPORTANT: Do not reuse used water.

Installation:

• There must be at least 10 cm of free space around the steriliser, 25 cm at the top, and enough room to open the door.
• The place where the steriliser is used must have proper ventilation.
• The steriliser must be placed on a stable surface and at an appropriate height for handling.
• Do not cover or block the lateral outlets or the outlet air grid of the condenser fan.
• Do not place the steriliser near water sources.
• Keep away from heat sources.

Example of printed report:

================================
Programme: WRAPPED

Temperature: 134C
Pressure: 206.0 kPa
Drying time: 08min
Sterilisation time: 4.0Min
--------------------------------
Time Temp. pressure
Start 12:28:17 089.0C
T1: 12:31:32 087.1C -075.0kPa
T2: 12:33:43 110.2C 052.0kPa
T3: 12:36:37 088.9C -080.0kPa
T4: 12:39:20 114.7C 053.7kPa
T5: 12:43:37 087.9C -080.0kPa
T6: 12:50:40 134.8C 206.0kPa
TS: 134.7C 209.5kPa
Max. Temperature: 135.2C
Min. Temperature: 134.3C
Max. Pressure: 214.0kPa
Min. Pressure: 204.9kPa
T7: 12:54:39 134.4C 211.4kPa
T8: 12:57:36 102.1C -060.0kPa
T9: 12:59:54 098.2C -060.0kPa
End 13:04:07 102.4C
--------------------------------
Cycle No .: 00017
Result: success
Date: 07/06/2014
SN: E54723
operator:
================================

Video: