Autoclave class B 23 l with LCD screen DORA
DORA model class B autoclave with a capacity of 23 liters with several pre-programmed sterilization cycles for different types of materials, self-diagnosis system, printer and USB connection.
An indispensable device for the sterilization of widely used instruments in hospitals, laboratories, dental clinics, etc.
Programs:
| Program | Temperature | Pressure | Sterilization time | total time | Guy | Max Load |
|---|---|---|---|---|---|---|
| solid | 121ºC | 110kPa | 20 minutes | 31min | solid material Without involvement | 7.5kg |
| 134ºC | 210kPa | 4 minutes | 19 minutes | |||
| porous | 121ºC | 110kPa | 20 minutes | 41min | solid/porous material Unwrapped / Single Wrapped / Double Wrapped | 7.5kg |
| 134ºC | 210kPa | 4 minutes | 26min | |||
| gaps | 121ºC | 110kPa | 20 minutes | 41min | solid/porous/hollow material Unwrapped / Single Wrapped / Double Wrapped | 7.5kg |
| 134ºC | 210kPa | 4 minutes | 26min | |||
| prions | 134ºC | 210kPa | 19 minutes | 41min | solid/porous/hollow material Unwrapped / Single Wrapped / Double Wrapped | 7.5kg |
| B&D test | 134ºC | 210kPa | 4 minutes | 21 min | - | - |
| Try Helix | 134ºC | 210kPa | 3.5min | 21 min | - | - |
| vacuum test | - | -80kPa | 15 minutes | - | - | - |
| drying test | - | - | - | 10 minutes | - | - |
| cleaning program | 105ºC | 20kPa | 5 minutes | - | solid/porous/hollow material Without involvement | 7.5kg |
* Types of materials. Examples :
Solid: Tweezers, scissors...
Porous: Textile products
Holes: Type A and type B such as cannulas, tubes, turbines, etc.
**Sterilization times:
The indicated sterilization times are approximate values as they may vary depending on factors such as the number of elements inserted, the ambient temperature of the place where the equipment is located, etc.
A first cycle will be somewhat longer in time than another that will be carried out subsequently due to the time required in the first to heat up from room temperature.
Characteristic:
- Automatic operation with several pre-programmed sterilization cycles.
- LCD screen with a friendly interface that shows updated information during the sterilization process.
- Printer included and USB connection to export data to a pendrive (not included).
- Self-diagnosis system for protection against overheating or overpressure.
Technical data:
- General measurements: 70 x 50 x 43 cm
- Chamber measures: Ø24.5 x 44 cm
- Weight: 55kg
- Input power: 220-230V, 50Hz, 1500VA
- Sterilization temperature: 121ºC / 134ºC
- Operating temperature: 5ºC / 40ºC
- Relative humidity: ≤80%
- Water tank volume: 4 L
Accessories included:
- (x3) Instrument Placement Tray
- (x1) Base for trays
- (x1) Tray removal handle
- (x1) Drain hose
- (x2) Hose-drain connector
Optional accessories and spare parts:
- 922-ROLLPAPER - Printer paper roll